Feb 28 2016

Color Presentation

I presented “A Color Vocabulary” yesterday at the Cross Border Weavers in Colville yesterday.


The first half are the slides, the second half is the slides again, with my notes.

Click Here to View A Colour Vocabulary.

Dec 5 2015

Figure My Figure

I went to the Figure my Figure meeting for the Guild’s 2016 Yardage Challenge — how to figure out how much you need to weave for the pattern you’ve chosen.   These are my notes.

First, you’ve got to pick a pattern.  The upside to a pattern like this one is that it has many pieces — many pieces tends to mean that each piece is not super-wide, and that means that you can weave your cloth on a smaller (narrower) loom.  Most patterns have the yardage labeled for 45″ or 60″ cloth — and if your loom’s that wide, bully for you, but if it’s not . . . well . . .

ChooseAPatternNext up, take all the pieces out.   What you’re looking for is to find the largest one that is the widest across:

MeasureLargestPatternPieceFocusMeasure it at the widest point.   This, plus the selvage, plus shrinkage, is your minimum width.

TransferPatternPiecesToTracingPaperOur intrepid weaver’s guild president, Sarah Laudenbach, a long time seamstress, suggests tracing all your pattern pieces on to tracing paper, and using the tracing paper pattern for your garment, keeping the original for reuse.  If you use (or cut down your) tracing paper to the maximum width of your cloth on the loom (minus the selvage, minus shrinkage), you can’t go too wrong.

LayOutPatternPiecesRemember, you have to line up the pieces with the grain.  Check the arrows, and get everything going in the right direction.  When you get everything traced, and before you start cutting the tracing paper, measure the length of the tracing paper.  This, plus shrinkage, is the minimum length you need to weave for your pattern.  Weave more.

UseMeasuringTapeToGetStraightA trick for lining up the pattern with the cloth: measure from the grain line to the edge of the cloth in several places, so you know that you’re straight with the grain of the cloth.

LineUpPatternWithArrowsIf you are using cloth with an obvious pattern/stripe/grid, you’re going to need more cloth, because you’re going to use the little dart-arrows in the pattern to line up with the lines in the cloth.  You may need substantially more cloth to do this, if you have a long repeat.

DetailofDrawingClothPatternonPatternBefore you cut your cloth, it’s a good idea to trace the pattern of the cloth onto your pattern piece, to make sure the cloth pattern falls in the right place.

DrawItOnCompletelySarah suggests drawing it in on the whole thing.

I don’t know about you, but I’m still not feeling super-sure about this whole thing . . . weaving yardage, no problem — cutting my cloth . . . . eek.

Nov 4 2015

Silk Scarf


Can I tell you just how terribly delighted with how this scarf turned out?  It’s 60/2 silk, sett at 60 epi, handdyed lilac warp, creamy natural silk weft, with silk thread embroidery.

SilkScarfLogoDetailI’m particularly pleased with this addition.  I knew that one of my normal angryspinner.com tags would be entirely too heavy for this piece, and I was wracking my brain trying to figure out what to do — of course — more embroidery!  I think it’s pretty subtle.

SilkScarfFringeSetUpBut what I really want to talk about is this ^  — the work.  There’s a number of different ways folks get their fringe to line up.  I started with pinning the hems down with these beautiful, thin, glasshead pins.  I used a ruler to hold the fabric in tension and straight while I pinned into a cotton towel-covered foam block.

I decided how long to make the fringe, and placed a second ruler along there.

SilkScarfFringeLoopI started each knot off the pin.

SilkScarfFringeLassoLasso it over a pin, then place the pin.

SilkScarfFringeTightenPull gently to tighten.SilkScarfFringeKnotThe shaft of the pin puts the knot in just the right spot.

SilkScarfFringeDoneFinished pinning.  I then use a rotary cutter and a quilting square to cut the ends (not shown — I didn’t have quite enough hands to do the work and photograph it).

SilkScarfEnd2Finished fringe.